Filter
Top Products
6 Maintenance
188 8254E / 8264E User Guide
(3) Replacement steps
Follow the procedure below to replace the ink cartridges.
• When handling ink cartridges, pay attention so that ink does not get into your eyes or
stick to your skin. If it does, immediately wash it off with water. Failing to do so might
cause irritation or light inflammation of your eyes or skin. In case of any abnormality,
consult a physician immediately.
• Do not disassemble ink cartridges. If disassembled, there is a possibility that ink
might come into contact with eyes or skin.
• Do not give ink cartridges strong shakes. Doing so may cause ink leakage.
• Do not disassemble ink cartridges. A disassembled ink cartridge cannot be used.
• When an ink cartridge is moved from a cold place to warm place, let the ink cartridge
warm up in the new printing environment for at least three hours before printing.
• Do not refill an ink cartridge with ink. It may result in abnormal printing.
• Insert or remove the ink cartridge only at the time of replacement.
Inserting or removing the ink cartridge except at the time of replacement may result
in incorrect printing.
1. Confirm that the printer is turned ON.
• Do not replace ink cartridges when the printer is turned OFF. The remaining ink may
not be detected correctly, causing abnormal printing.
• A used ink cartridge should be put in a vinyl bag, etc., and disposed of in compliance
with local ordinance and instructions of local authorities.