Filter
Top Products
4 Handling The Printer
8254E / 8264E User Guide 115
4.6.4 Cleaning menu (Setup item 4 of 7 total)
Allows you to set up parameters for performing head cleaning.
Access this menu by pressing the [Menu] key which causes "Menu1: Setup>" to appear in the control
panel’s display. Pressing the [-] key three times causes "Menu4: Cleaning>" to display. (The > character
after a menu name indicates that there are sub-menus under that menu.)
From the "Menu4: Cleaning>" display, press the [>] key. This takes you to the first sub-menu titled
"Clean1: Economy." Pressing the [-] and [+] keys allows you to increment up or down to each of the Setup
items in the left column below.
• Head cleaning can be performed when "Ready to Print" is displayed in the control
panel. Refer to the following for operation procedures.
6.3.3 Cleaning the head
Setup item Description
Economy Discharges a lesser amount of ink compared to Normal.
Normal Select this mode for normal cleaning.
Strong Discharges a greater amount of ink compared to Normal.
Used when the print head does not improve when Head cleaning is performed at
Normal setting.
LittleCharge Refills a small amount of ink.
Charges a small amount of ink when printing is not stable after ink
replenishment.
—
• Pressing the [Enter] key causes "Cleaning **%" to be displayed in the control
panel and the Head cleaning to start.
The state of progress on the Head cleaning displays in % in the control panel.
• Pressing the [Cancel] key shifts to the previous menu.