Filter
Top Products
3 Preparing For A Job
8254E / 8264E User Guide 47
4. From the rear, insert the roll media into the media feed slot.
• Engaging and locking the damper drive switching plates while previously loading
the roll media should prevent slack in the roll media. However, if the roll media
does develop some slack, rewind it tightly and then reload it.
5. Pull the roll media out about one meter (39") from the front media feed slot which is located inside
the front cover.
No. Name
1 Roll media
2 Media feed slot
No. Name
1 Roll media
2 Media feed slot