Filter
Top Products
4 Handling The Printer
8254E / 8264E User Guide 161
4.9.3.2 Settings that can be changed or confirmed while printing
• The Print start menu is displayed only when the printer is warming up.
• When you change a setting during operation, be sure to select "Backup" to save
the
setting that you changed.
• If the printer returns to "Ready to Print" mode without "Backup" being selected, the
changed setting is not
saved.
Setup item Setting Description
Print Start
—
• [Enter] key: If the heater temperature does not reach
the set value during warming-up, printing starts.
Temperature Pre Check the current Pre-Heater temperature.
Platen Check the current Platen Heater temperature.
After Check the current After Heater temperature.
Pre-Heater Off / 30 °C to 50 °C Change the Pre-Heater temperature.
Platen Heater Off / 30 °C to 50 °C Change the Platen Heater temperature.
After Heater Off / 30 °C to 50 °C Change the After Heater temperature.
PF Adjust –20 pulse to 0 to 20 pulse Change the feed adjustment value.
Backup
—
• [Enter] key: Save the changed setting.
—
• [Cancel] key: "Ready to Print" displays in the control
panel.