Filter
Top Products
4 Handling The Printer
118 8254E / 8264E User Guide
4.6.6 Version menu (Setup item 6 of 7 total)
Allows you to display the versions of the printer’s firmware.
Access this menu by pressing the [Menu] key which causes "Menu1: Setup>" to appear in the control
panel’s display. Pressing the [-] key five times causes "Menu6: Version" to display. Press the [Enter] key
to display the current version of firmware.
4.6.7 Sleep Mode menu (Setup item 7 of 7 total)
Allows you to configure Sleep Mode settings.
Access this menu by pressing the [Menu] key which causes "Menu1: Setup>" to appear in the control
panel’s display. Pressing the [-] key six times causes "Menu7: Sleep Mode" to display.
From the "Menu7: Sleep Mode>" display, press the [Enter] key. Pressing the [-] and [+] keys allows you
to choose whether to set the auto cleaning interval or activate Sleep Mode immediately.
When you activate Sleep Mode, the printer operates as follows.
• The exhaust fan stops.
• The vacuum fan stops
• All heaters turn off.
• All lamps turn off except for the Power lamp
• Automatic head cleaning is performed after the time set in the Time Setting menu has expired.
4.6.7.1 Timer Setting menu
Setup item Setting Description
Ver.M/C *.**(Main)/*.**(Controller) Displays the versions of the firmware on the main side
(M) and controller side (C).
—
• Pressing the [Cancel] key shifts to the previous menu.
Setup item Setting Description
Sleep Mode Set Timer Set the auto cleaning interval.
4.6.7.1 Timer Setting menu
Start
Activate Sleep Mode
4.6.7.2 Sleep Mode Start menu
—
• Pressing the [Cancel] key shifts to the previous menu.
4.6.1 Setup menu (Setup item 1 of 7
total)