Filter
Top Products
3 Preparing For A Job
44 8254E / 8264E User Guide
3.5.1.2 8254E Loading roll media
Follow the procedure below to load roll media on the 8254E.
• Load roll media on a horizontal surface such as a desk or table.
If you load roll media with the scroller standing vertically, there is a possibility that
the scroller might get damaged.
1. Load the roll media onto the scroller so that the media’s loose end "flap" points in a counter-clockwise
direction (toward the left) when viewed from the fixed flange, as shown below.
2. Push the fixed flange into the roll media until its cardboard core is firmly against the inside surface
of the fixed flange.
3. Attach the movable flange firmly to the roll media so that the inside surface of the flange is flat against
the cardboard core.
No. Name
1 Fixed flange
2 Roll media
No. Name
1 Movable flange
2 Roll media