Filter
Top Products
2 Product Overview
8254E / 8264E User Guide 21
2.3.2 Printer rear
2.3.2.1 8264E Rear section
No. Name Function
1 Roll media holders Used to load the roll media.
Include flanges that are inserted into the roll media’s core and the ratcheting
levers that lock the roll media holders in place.
2 Media feed slot Used for feeding the media from back to front.
3 Ink cartridge slots Used to hold the ink cartridges.
4 Media guide Used for feeding the media smoothly when the media is set or printed.
The Pre-Heater used to warm media is installed under the media guide.
5 AC inlets (2) Used for connecting the power cable.
6 USB connector Not used for this printer.
7 Network interface connector Used to connect a network interface cable.
8 Waste fluid tank Used for collecting the waste ink discharged from the printer.
9 Waste fluid valve Used when discharging the waste fluid from the waste fluid tank.
It is normally closed.