Filter
Top Products
x • Safety Notes XEROX WIDE FORMAT COPY SYSTEM
Operational Safety Information
To ensure the continued safe operation of your Xerox/Fuji Xerox
equipment, follow these safety guidelines at all times.
Do
These:
- Always connect equipment to a correctly grounded power outlet. If in
doubt, have the outlet checked by a qualified electrician.
- This equipment must be connected to a protective grounded circuit.
This equipment is supplied with a plug that has a protective
grounding pin. This plug will only fit into a grounded electrical outlet.
This is a safety feature. To avoid risk of electric shock, contact your
electrician to replace the electrical outlet if you are unable to insert
the plug into it. Never use a plug that lacks a grounded connection
terminal to connect the product to an electrical outlet.
- Always follow all warnings and instructions that are marked on or
supplied with the equipment.
- Always exercise care when moving or relocating equipment. Please
contact your local Xerox/Fuji Xerox Service Department or your local
support organization to arrange relocation of the product to a location
outside your building.
- Always locate the equipment in an area that has adequate ventilation
and room for servicing. See the Install guide for minimum
dimensions.
- Always use materials and supplies specifically designed for your
Xerox/Fuji Xerox equipment. Use of unsuitable materials may result
in poor performance.
- Always unplug this equipment from the electrical outlet before
cleaning.
Do Not
Do These:
-
Never use a plug that lacks a grounded connection terminal to
connect the product to an electrical outlet.
- Never attempt any maintenance function that is not specifically
described in this documentation.
- This equipment should not be placed in a built-in installation unless
proper ventilation is provided. Please contact your Authorized Local
Dealer for further information.
- Never remove covers or guards that are fastened with screws.
There are no operator serviceable areas within these covers.
- Never locate the equipment near a radiator or any other heat source.
- Never push objects of any kind into the ventilation openings.
- Never override or “cheat” any of the electrical or mechanical interlock
devices.