Filter
Top Products
12
• NTLM v2 Response - Allows the System Administrator to enable the device to send only the NT Lan Manager (NTLM)
Version 2 protocol (and refuse the LM & NTLM versions). Is accessible by typing http://{IP
Address}/diagnostics/NTLMSecurity.php.
• Custom Size Allowed - Allows the System Administrator to allow custom size paper to be used for print jobs. Is accessible by
typing http://{IP Address}/diagnostics/customSizeAllowed.php.
• Copies Per Page Print Setting - Allows the System Administrator to permit the use of the copies per page setting for print
jobs. Is accessible by typing http://{IP Address}/diagnostics/copiesPerPage.php.
• Print Behavior Settings (Suppress Last Blank Page) - Allows the System Administrator to suppress a last blank page for
print jobs. Is accessible by typing http://{IP Address}/diagnostics/suppresslastblankpage.php.
• Display CAC/PIV Feature - Allows the System Administrator to enable the display of the CAC/PIV feature. Is accessible by
typing http://{IP Address}/diagnostics/enableCAC.php.
• Install Software (View Scan Templates Created by WIA Driver) - Allows the System Administrator to install the
#00022121 Network Controller version to view templates created by the Microsoft Windows Image Acquisition (WIA)
driver. Is accessible by typing http://{IP Address}/diagnostics/00022121.dhtml. The System Administrator should be
aware that installing this Network Controller version will result in the ColorQube™ 9201/9202/9203 no longer being in the
certified configuration.
21. The following pages are available from the Web User Interface to a ColorQube™ 9201/9202/9203 with no user login and
authentication required:
• Site Map - Provides the user with hyperlink pointers to each Web User Interface screen organized by Web UI tab. Is
accessible by selecting the [Site Map] button in the upper right hand corner of every Web User Interface page.
• Exit from Sleep Mode – Automatically informs the user, when the Network Controller on a ColorQube™ 9201/9202/9203 is
in ‘Sleep Mode’ at the time the user attempts to make a change to current settings on a Web User Interface web page, that
the Network Controller needs to be taken out of ‘Sleep Mode’ before the requested changes can be made.
22. Customers who required specialized changes to support unique workflows in their environment may request specific changes to
normal behavior. Xerox will supply these SPAR releases to the specific customers requesting the change. Please note that in
general enabling a specialized customer-specific feature will take the system out of certified configuration.