Filter
Top Products
Maintenance Operator Guide
2-2 DocuTech 65/DocuPrint 65
Controller power-on procedure
The controller power-on button and the Light Emitting Diode (LED) are shown
in Figure 2-1. The LED glows green when the controller power is on.
Figure 2-1. Controller power-on button and LED
To power on the controller:
1. Switch on the power for each of the connected peripherals.
2. Switch on the monitor.
3. Press the controller “On” button.
4. Confirm that the controller LED light is on.
LED
Power On
Button