Filter
Top Products
Operator Guide Paper and other stock
DocuTech 65/DocuPrint 65 3-11
GBC stock
(Sameceda)
Plastic comb or
strap binding via
slotted holes or
rectangles at
frequent intervals
along the long
edge (the bind
edge)
• Load with slotted holes
inboard; for example, load
SEF when the holes are down
the long edge.
• Loading with holes on the
lead-edge (LEF) or the trail-
edge (LEF) is not supported,
but may work well for some
stock depending upon the size
and number of the holes and
how they affect the sensors in
the printer; therefore, if you
intend to use LEF you should
run a sample of the stock to
confirm its acceptability before
running the job.
Table 3-6. Recommendations for loading special stock
Stock Type Common Use Recommendation