Filter
Top Products
8 Quick Start Guide
Configuring printer network settings
After unpacking the EX7750 and the printer, configure the printer network settings to
enable the printer to communicate with the EX7750. Printer network settings are
accessed via setup menus from the printer front panel.
T
O
CONFIGURE
THE
PRINTER
NETWORK
SETTINGS
1. Unpack and prepare the printer, then power it on. For more information, see the
Xerox Setup Guide
.
2. Make sure the printer front panel displays Ready To Print.
3. Use the arrow buttons and the OK button to navigate to the TCP/IP Setup menu.
Configure settings as shown.
4. When finished, power off the printer.
Information
Walk-Up Features
Printer Setup
Troubleshooting
READY TO PRINT
CMYK
Configuration Page
Connection Setup
Paper Handling Setup
Calibration Setup
PostScript Setup
Printer Setup
Connection Setup Page
Network Setup
USB Setup
Reset Connection Setup
Exit
Connection Setup
TCP/IP Setup
Netware Setup
Ethernet Speed...
EtherTalk
Exit
Network Setup
TCP/IP Setup
On
On
On
255.255.252.0
TCP/IP Gateway
100.100.100.102
Port 9100
LPR
TCP/IP
DHCP/BOOTP
Auto IP
TCP/IP Address: 100.100.100.101
TCP/IP Network Mask:
Off
On
Set to Off.
Press OK
to edit.
Configure settings
TCP/IP Address: 100.100.100.101
TCP/IP Network Mask: 255.255.252.0
TCP/IP Gateway: 100.100.100.102
Press OK to select.
Follow on-screen instructions to edit.
Information
Walk-Up Features
Printer Setup
Troubleshooting
READY TO PRINT
CMYK
Up arrow
Down arrow
OK button
Return to
previous
Printer front panel
Set to On.