Filter
Top Products
Version 1.8 2/4/99
11
PROCEDURE D
UPGRADE VIA NOVELL NETWARE QUEUE
Warning: Once the upgrade process has begun DO NOT Power off your
Printer!
1. Print a
Configuration
sheet. Keep this page for future reference. For
directions on doing this, reference the section labeled
Before you
Upgrade
2. Submit the upgrade file to the printer queue using your normal Novell
NetWare print procedure. Send the file directly, do not use a print
driver or an application.
3. The upgrade should take about 10 minutes to perform.
4. To confirm upgrade is successful, refer to the section labeled
Determining a Successful Upgrade
.
IF YOU HAVE PROBLEMS:
If the printer never goes to “Downloading” check the status of the job in the
queue. If the job is in the queue and Active, but not being sent to the
printer, power the printer “off “and then “on”. See if the job is then sent to
the printer.
In addition, consult the section labeled
General Troubleshooting.
Warning: If the download was not successful, upgrade via the parallel port!