Filter
Top Products
Version 1.8 2/4/99
12
PROCEDURE E
MACINTOSH – XEROX PRINTER UTILITY
Warning: Once the upgrade process has begun DO NOT Power off your
Printer!
1. Print a
Configuration
sheet. Keep this page for future reference. For
directions on doing this, reference the section labeled
Before you
Upgrade
.
2. Launch the Xerox Printer Utility
3. Select the N17 printer to upgrade in
PostScript Printers
list.
4. Select
Send File
.
5. Locate the upgrade file.
6. Select
Open
to send the upgrade file to the printer.
7. The Xerox Printer Utility will send the upgrade file to the printer. The
upgrade should take about 10 minutes.
8. To confirm upgrade is successful, refer to the section labeled
Determining a Successful Upgrade
. For problems, consult the
section labeled
General Troubleshooting
.
Warning: If the download was not successful, upgrade via the parallel port!