Filter
Top Products
4.3 SNMP Traps
The switch supports the following SNMP traps. When the trap event occurs, the SNMP agent will generate
a trap notification to SNMP trap manager stations. Up to three trap managers can be supported. Each trap
manager must be configured with : IP address and Community string which the trap manager belongs.
The provided traps and associated events are:
Trap Name RFC1157 Event of Trap Generated
Cold Start Generic The device is powered on or reboot
remotely and complete initialization
Authentication Generic SNMP community authentication failure
Port link change Generic Any switched port link down
Port link change Generic Any switched port link recovery
Fan 1 failure Specific Fan 1 failure warning or recovery
Fan 2 failure Specific Fan 2 failure warning or recovery