Filter
Top Products
16
Phaser 2135 Color Printer
Paper Tips
Caution
Do not use any media designed for inkjet printers, especially
inkjet coated paper and inkjet transparencies. Inkjet media
are coated with a substance that can damage printer
components. Damage caused by using unsupported media is
not covered by the printer’s warranty. Always use Xerox
Phaser media that has been specially designed for use with
your printer.
Use only Phaser 35 Series Transparencies. Other
transparencies may cause damage to the fuser. Any damage
that is caused due to the use of unsupported media is not
covered by your printer’s warranty. See Xerox Phaser 35
Series Transparencies on page 32.
■
For a comprehensive list of media types, weights, sizes and part
numbers, print the Paper Tips Page from the front panel. Press
Menu until Support Menu is selected. Press the Value button
until Print Paper Tips Page is selected. Press the Enter button.
■
For specialty media, use the Multi-Sheet Bypass Feeder (MBF)
with the side output tray open on the left side of the printer; refer
to page 27.
■
For best results, use Xerox Phaser paper; it is guaranteed to
produce excellent results on your Phaser 2135 printer.
■
A low-paper message is displayed when there are approximately
30 to 40 sheets of paper remaining in the paper tray.
■
Auto tray switching is available. When one tray runs out of media,
the printer switches to the next tray that contains the same media
size. If you do not have a second tray, a Load Tray 1 message
appears on the front panel.
■
While printing, do not remove:
■
the media source tray that you have selected in the driver or
front panel.
■
any trays above the currently selected media source tray.
Paper Tips