Filter
Top Products
66
Phaser 2135 Color Printer
Immediate Effects:
INHALATION: Minimal irritation to respiratory tract, as for any non-toxic dust
SKIN: Not expected to cause skin irritation
EYES: Not expected to cause eye irritation
INGESTION: Not an expected route of exposure
Chronic Effects: None known
SIGNS AND SYMPTOMS OF EXPOSURE: Minor irritation to respiratory tract.
MEDICAL CONDITIONS AGGRAVATED BY EXPOSURE: None known.
SECTION 4 - FIRST AID MEASURES
INHALATION: Remove person to fresh air. Seek medical attention if
symptoms occur.
EYES: If particles get into eye, flush thoroughly with water. Seek medical
attention if symptoms occur.
SKIN: Wash thoroughly with soap and water. Seek medical attention if
symptoms occur.
INGESTION: Dilute stomach contents with several glasses of water. Seek
medical attention if symptoms occur.
SECTION 5 - FIRE FIGHTING MEASURES
FLASH POINT: Not applicable
FIRE & EXPLOSION HAZARDS: Toner is a combustible powder. Like most
organic powders, it can form explosive mixtures when dispersed in air.
EXTINGUISHING MEDIA: Water, dry chemical, carbon dioxide, or foam.
FIRE FIGHTING INSTRUCTIONS: Avoid inhalation of smoke. As for any fire,
wear protective clothing and self-contained breathing apparatus.
SECTION 6 - ACCIDENTAL RELEASE MEASURES
SPILL OR LEAK: Sweep up or vacuum spilled toner and carefully transfer into
sealable waste container. Sweep slowly to minimize generation of dust during
clean up. If a vacuum is used, the motor must be rated as dust tight. A
conductive hose bonded to the machine should be used to reduce static
buildup. Clean up residue if necessary with soap and water. Wash or dry clean
garments after removing loose toner.
SECTION 7 - HANDLING AND STORAGE
HANDLING: No special precautions, when used as intended.
STORAGE: Avoid high temperatures.
SECTION 8 - EXPOSURE CONTROL - PERSONAL PROTECTION
No special personal protection indicated, when used as intended in Xerox
Phaser® color printers.
THRESHOLD LIMIT VALUE (TLV): 10 mg/m
3
(total dust)
PERMISSIBLE EXPOSURE LIMIT (PEL): 15 mg/m
3
(total dust);
5 mg/m
3
(respirable dust)
SHORT-TERM EXPOSURE LIMIT (STEL): None established
Specifications