Filter
Top Products
XMS PC Connect
User’s Guide
16
Connect the Scanner
When scanning using the XMS PC Connect application, you do not need to have a memory card or USB flash drive
inserted in the scanner.
1. Plug the USB cable into the USB port on the scanner then into a USB port on the computer.
2. Press and hold-down the power button on the scanner for 3 seconds to turn on the power.
3. The computer will detect that a device has been plugged into a USB port and load the appropriate drivers.
If a memory card or a USB flash drive is connected to the scanner, the computer will detect the memory card
or flash drive as a disk drive and display the standard Windows AutoPlay options. Please close this window, you
cannot view or copy files from the memory card while the XMS PC Connect application is running.