Yamaha CRW8824IX Series Computer Drive User Manual


 
Operations
Loading a Disc
12
1 Open the tray by pressing the Eject button on the CRW8824IX drive’s front
panel.
2 Place the disc onto the tray with its label or printing facing upward.
3 Press the Eject button to close the tray.
n When a disc is loaded, the ON/DISC LED is lit up in orange first, then changes to
green. For more details, refer to page 29.
n Do not push or pull the tray using excessive force. Doing so can damage the drive
or the disc. Instead, always use the Eject button to open or close the tray.
Ejecting a Disc
12
1 Open the tray by pressing the Eject button on the CRW8824IX drive’s front
panel.
2 Remove the disc from the tray.
3 Press the Eject button to close the tray.
n It may not be possible to open the disc tray while a disc is being read or written.
n Only remove the disc after the disc tray has fully opened. Otherwise, you risk
damaging the drive or the disc.
20