Filter
Top Products
35
SET UP for Input Signals
COLOR SYSTEM / AUTO
Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input signal mode.
(“SIGNAL [VIDEO]” menu is displayed.)
Press to select the “COLOR SYSTEM” or “AUTO”.
Press to select each function.
3D Y/C FILTER
(
NTSC
)
COLOR SYSTEM
AUTO
(
4:3
)
ON
AUTO
NORMAL
3:2 PULLDOWN
OFF
SIGNAL
[
VIDEO
]
Press
(ACTION) button
SET UP
SIGNAL
SCREENSAVER
COMPONENT/RGB-IN SELECT
RGB
OSD LANGUAGE
ENGLISH
(
US
)
SET UP TIMER
If the image becomes unstable:
With the system set on Auto, under conditions of
low level or noisy input signals the image may in
rare cases become unstable. Should this occur,
set the system to match the format of the input
signal.
Mode
Color system
AUTO (4:3)
Function
Set the color system to match the input signal. If set to “AUTO”, the color system is
determined automatically.
Set to “NORMAL” to view 4:3 images in an unchanged format when AUTO is selected.
If you would like to view 4:3 images in “Just” format, set to “JUST”.
AUTO PAL SECAM M NTSC NTSC
3:2 PULLDOWN
Select “SIGNAL” from the “SET UP” menu during VIDEO (S VIDEO) or
COMPONENT input signal mode. (“SIGNAL [VIDEO]” menu is displayed.)
Press to select 3:2 PULLDOWN.
Press to set ON/OFF.
Press to exit from adjust mode.
Note:
When ON, this setting only affects the following signal input.
• NTSC signal input during “VIDEO (S VIDEO)” input signal mode.
• 525i(480i) signal input during “COMPONENT” input signal mode.
When on, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are
recorded at 24 frames per second.
If the picture is not stable, turn the setting to off.
R
Press
(ACTION) button
SET UP
SIGNAL
SCREENSAVER
COMPONENT/RGB-IN SELECT
RGB
OSD LANGUAGE
ENGLISH
(
US
)
SET UP TIMER
3D Y/C FILTER
(
NTSC
)
COLOR SYSTEM
AUTO
(
4:3
)
ON
AUTO
NORMAL
3:2 PULLDOWN
OFF
SIGNAL
[
VIDEO
]
SIGNAL
[
COMPONENT
]
3:2 PULLDOWN
OFF