Filter
Top Products
69 En
ADJUSTING THE AUDIO BALANCE
ADVANCED
OPERATION
English
5 Press TEST when you have completed all
your adjustments.
• All the channel levels cannot be adjusted when the stereo
playback or my beam is selected as the beam mode (see
pages 46 and 47).
• FRONT L/R cannot be adjusted when the stereo plus 3 beam is
selected as the beam mode (see page 41).
• FRONT L/R are automatically adjusted depending on the
settings of the other channels when the stereo plus 3 beam or
stereo playback is selected as the beam mode (see pages 41 and
46).
y
If the level of a particular channel cannot be adjusted, – –dB
appears in the front panel display.
You can also manually adjust the channel levels while
playing back an input source such as a DVD.
1 Set the operation mode selector to YSP to
switch to the operation mode of this unit.
2 Press CH LEVEL repeatedly (or press
CH LEVEL and then / ) to select the
channel you want to adjust.
The front panel display changes as follows.
Notes
TEST
Using the audio output being
played back
CH LEVEL MENU
RETURN
TEST
ENTER
OFF
0
+10
YSP
TV/AV
YSP
TV/AV
CH LEVEL
ENTER
CH LEVEL
FRONT L +1.0dB
CENTER -2.5dB
FRONT R +1.0dB
SUR.R +2.0dB
SUR.L +2.0dB
SWFR --dB
or