Filter
Top Products
TNN 500AF
Determine the appropriate CPU Finger Bolts & clip holes.
NOTES
1) Apply a generous quantity of thermal grease (1mm or 0.04 inches in height) on the
CPU core, and install the CPU Block Base (gold colored).
2) Apply thermal grease on the grooves of the CPU Block Base and the CPU Case Block
Base where the CPU Heatpipes come in contact.
3) The CPU Case Block Base already has thermal grease coated underneath, so it
should not be taken off under normal circumstances.
4) Use a coin or a screwdriver to firmly tighten the CPU Finger Bolts.