Filter
Top Products
Shock Hazard
The printer and power supply should never be operated in a location where
either one can get wet. Personal injury could result.
Media
Always use high-quality, approved labels and tags. If adhesive backed
labels are used that DO NOT lay flat on the backing liner, the exposed
edges may stick to the label guides and rollers inside the printer, causing the
label to peel off from the liner and jam the printer. Approved supplies can
be ordered from your dealer.
If media run out while printing, DO NOT turn the power switch OFF (0)
while reloading or data loss may result. After loading new supplies, press
the feed button to resume printing.
Static Discharge
The discharge of electrostatic energy that accumulates on the surface of the
human body or other surfaces can damage or destroy the print head or
electronic components used in this device. DO NOT TOUCH the print
head or the electronic components under the top cover.
Thermal Printing
The print head becomes hot while printing. To protect from damaging the
print head and risk of personal injury, avoid touching the print head. Use
only the cleaning pen to perform maintenance.
iv 980483-001A