Zebra Technologies P330i Printer User Manual


 
980459-001 Rev C P330i & P330m Card Printer User’s Manual 29
4
Cleaning
Cleaning the Printer
Clean your printer using Pre-Saturated Cleaning Cards provided. The regular use of these
cards will clean and maintain important parts of your printer that cannot be reached, including
the Print Head, Transport Rollers, and optional Magnetic Encoder Station.
When to Clean
When the LCD Panel displays the message CLEAN PRINTER.
Approximately every 1000 cards when using 5-panel color ribbon (P330i only), or every 5000
cards when using a monochrome ribbon.
Caution • PROTECT YOUR FACTORY WARRANTY!
The recommended cleaning procedures must be performed to maintain your
factory warranty. Other than the recommended cleaning procedures described in
this manual, allow only Zebra authorized technicians to service the P330i or
P330m Printer.
NEVER loosen, tighten, adjust, bend, etc., any part or cable inside the printer.
NEVER use a high pressure air compressor to remove particles in the printer.