Zebra Technologies P310i Printer User Manual


 
P310
i
Plastic Card printer
Card
Printer
Solutions
General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
Appendix C
18
Your P310i Printer includes a simple cleaning
system using the Pre-Saturated Cleaning Cards
provided. The regular use of these cards will clean
and maintain important parts of your printer:
including the Print Head, and Transport Rollers
and Magnetic Encoder Station (optional feature).
CLEANING
SYSTEM
WHEN TO CLEAN
When the amber & red indicators flash.
(Every 1000 cards* approx.)
* Using 5-panel color ribbon (YMCKO).
(Every 5000 cards* approx.)
* Using monochrome ribbon.
*Optional factory setting.
HOW TO CLEAN
1. Leave power on.
Open Cover and release Print Head Bracket to
remove ribbon.
Close Print Head.
Close Cover. Remove cards from Card
Cartridge.
2. Insert one Pre-Saturated Cleaning Card
(provided) through slot on the side of the Card
Cartridge.
3. Press the Panel Button for a few seconds. The
card will feed into printer and carry out the
cleaning process. Repeat the process with a
new Cleaning Card if necessary.
Although the amber and red inducators will keep
flashing until the cleaning process has been
performed, the printer will continue to operate.
Note: For cleaning prior to the WHEN TO CLEAN signal, press the Panel
Button for 3 seconds to start the cleaning process (Repeat first steps 1 & 2
above).