Filter
Top Products
P310
i
Plastic Card printer
Card
Printer
Solutions
General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
Appendix C
32
MEDIA LOADING ORIENTATION
Orient the cards with the Smart Card Chip at
the top of the card and facing away from the
printer.
SMART CARD CONTACT STATION
INTERFACE
When a command to the parallel printer
interface sends a card to the Smart Card
Contact Station, the printer connects the
Smart Card Contact Station to the female DB-
9 connector on the rear of the printer.
An attached external Smart Card Programmer
can be used to program Smart Card chips.
DB - 9 SMART CARD DB - 9 SMART CARD
PINS CONTACT POINTS PINS CONTACT POINTS
1 CI (VCC) 6 C6 (Vpp)
2 C2 (Reset) 7 C7 (I/O)
3 C3 (Clock) 8 C8 (RFU)
4 C4 (RFU)
5 C5 (GND)
9 (GND when chip is at station)
Refer to the Card Printer Programmer’s Manual for complete programming
information.
DO NOT position printing over the Smart Card Chip.