Filter
Top Products
ZM400/ZM600
Specifications Subject to Change without Notice Technical Specifications
Product Guide - EMEA 29 May 2007
Eltron Programming Language® (EPL II®)
• Compatible with mainframe, mini, and PC hosts
• Four position field rotation (0º, 90º, 180º, 270º)
• Variable field support (00 to 99)
• Counter support (up to 10)
• Variable field addition and subtraction
• Status reporting
• Form storage
• Metered print odometer
Communications Specifications
• USB 2.0
• IEEE 1284 Bi-directional parallel interface
• High-speed serial interfaces
- RS-232C, with DB9F connector
- Configurable baud rate (300 – 115,200kB), parity,
and data bits. Stop bits at 1 or 2.
- Software (XON/XOFF), hardware (DTR/DSR, or
RTS/CTS) communication handshake protocols
- RS422/485 with optional adapter.
• ZebraNet
®
Wireless Plus Print Server – 802.11b/g - compliant
wireless print server
• ZebraNet
®
10/100 Print Server - Ethernet network print server
(10BASE-T, 100BASE-TX)
Electrical Specifications
• Auto-detectable 90-265VAC, 48-62 Hz, 5A fused power supply
• Agency approvals: IEC 60950-1 EN 55022 Class B, EN55024,
EN 61000-3-2, EN 61000-3-3.
• Product Markings: cTUVus, CE, FCC-B, ICES-003, VCCI, C-
Tick, NOM, S-Mark (Arg), CCC, GOST-R, BSMI, MIC, ZIK,
SABS
Physical Specifications
• Height: 13.3" (338mm)
• Width: 10.9" (278mm)
• Depth: 18.7" (475mm)
• Weight: 32.4lbs. (15kg)
• Shipping Weight: 49 lbs (22kg)
Environmental Specifications
• Operating environment:
Thermal Transfer = 40º to 104ºF (5º to 40ºC)
Direct Thermal = 32º to 104ºF (0º to 40ºC)
20% to 85% non-condensing R.H.
• Storage/Transportation environment:
-40º to 140ºF (-40º to 60ºC)
5% to 85% non-condensing R.H.
Preventative Maintenance
Zebra recommends cleaning the printer on a regular basis using
standard Zebra printer parts and cleaning supplies. Consult your
User’s Guide for further details.
• Cleaning:
The exterior is cleaned with a lint-free cloth, and if necessary, a
mild detergent solution or desktop cleaner. Interior components
(print head, platen roller, media sensor, peel bar, ribbon and
media paths) are cleaned with alcohol or blown air to remove
any particles.
• Lubrication:
All mechanical parts are self-lubricating and do not require
additional lubrication.
• Print Registration:
Media registration and minimum label length are affected by
media type and width, ribbon type and print speed. Performance
improves as these factors are optimized. Zebra recommends
always qualifying any application with thorough testing.
• Print Head Replacement:
For optimal printing quality and proper printer performance
across our product line, Zebra strongly recommends the use of
genuine Zebra™ supplies as part of the total solution.
Specifically, the ZM400 and ZM600 printers are designed to
work only with genuine Zebra™ printheads, thus maximizing
safety and print quality.