Filter
Top Products
ZM400/ZM600
Specifications Subject to Change without Notice Technical Specifications
Product Guide - EMEA 31 May 2007
Printing Specifications
• 203 dpi resolution (8 dots/mm)
- Dot size (W x L):
0.0049" x 0.0049" (0.125mm x 0.125mm)
• 300 dpi resolution (12 dots/mm)
- Dot size (W x L):
0.0033" x 0.0039" (0.084mm x 0.099mm)
• First dot location measured from inside media backing edge:
0.10" ±.04" (2.5mm ± 1mm)
• Maximum print width: 6.6" (168mm)
• Maximum continuous media print length:
203 dpi 300 dpi
102"
2590mm
45”
1143mm
• Media registration tolerance:
- Vertical = <
±0.039" (±1.0mm) on non-continuous media - --
- Horizontal = <
±0.039" (±1.0mm) within a roll of media
• Programmable print speeds:
- 203 dpi = 2.4" (61mm), 3” (76mm) through 10" (254mm)
per second in 1" increments
- 300 dpi = 2.4" (61mm), 3” (76mm) through 8" (203mm) per
second in 1" increments
Media Specifications
• Maximum non-continuous label length: 39" (991mm)
• Media type: continuous, die-cut, tags, black-mark
• Media web width (label and liner):
2.0" (51mm) to 7.0" (178mm) Tear / Cutter
2.0” (51mm) to 6.75” (171mm) Peel / Rewind
• Minimum label length:
- 0.5" (12.7mm) in Tear, Peel and Rewind Mode
- 1.0" (25.4mm) in Cutter Mode
• Media thickness (label and liner):
0.0023" (0.058mm) to 0.010" (0.25mm)
• Maximum media roll size:
8.0" (203mm) O.D. on a 3" (76mm) I.D. core
• Maximum fan-fold pack size:
8.0"L (203mm) x 7.0"W (178mm) x 6.2"H (157mm)
• Gap and notch sensing standards:
- Inter-label gap: 2 - 4mm, preferably 3mm
- Sensing notch: 0.25"W (6mm) x 0.12"L (3mm)
- Sensing hole: 0.125" (3mm) diameter
* Note:
Notch & Hole Position centered from 0.15” to 3.5”
from media inner edge
• Black mark sensing standards:
- Black mark length (parallel to inside media edge):
0.098" - 0.453" (2.5mm - 11.5mm)
- Black mark width (perpendicular to inside media edge):
>
0.37" (> 9.5mm)
- Black mark location: within 0.040" (1mm) of inside media
edge
- Black mark density: > 1.0 Optical Density Units (ODU)
- Maximum media density: 0.5 ODU
Ribbon Specifications
• Ribbon width: 2.00" (51mm) to 6.85" (174mm)
• Standard Lengths: 984' (300m) or 1476' (450m)
• Maximum ribbon roll size:
3.2" (81.3mm) O.D. on a 1.0" (25.4mm) I.D. core
• Ribbon wound ink-side out.
Standard Printer Fonts
Fonts A, B, C, D, E, F, G, H, and GS are expandable up to 10
times, height and width independently. However, fonts E and H
(OCR-A and OCR-B) are not considered “in-spec" when expanded.
The scalable smooth font 0 (CG Triumvirate™ Bold Condensed) is
expandable on a dot-by-dot basis, height and width independent,
while maintaining smooth edges. Maximum character size depends
on available memory.
IBM Code Page 850 international character sets are available in the
fonts A, B, C, D, E, F, G, and 0 through software control.
Font Matrices for 8 dot/mm (203 DPI) Print heads
Font Matrix Type* Character Size
Inches Millimeters
Height
Width
Inter-character Gap
Height
Width
Char/inch
Height
Width
Char/mm
A 9 5 1 U-L-D 0.044 0.029 34.0 1.13 0.75 1.33
B 11 7 2 U 0.054 0.044 22.7 1.38 1.13 0.89
C,D 18 10 2 U-L-D 0.088 0.059 17.0 2.25 1.50 0.67
E 28 15 5 OCR-B 0.137 0.098 10.2 3.50 2.50 0.40
F 26 13 3 U-L-D 0.127 0.078 12.8 3.25 2.00 0.50
G 60 40 8 U-L-D 0.294 0.235 4.3 7.50 6.00 0.17
H 21 13 6 OCR-A 0.103 0.093 10.7 2.63 2.38 0.42
GS 24 24 2 SYMBOL 0.118 0.127 7.8 3.00 3.25 0.31
P 20 18 N/A U-L-D .098 .088 N/A 2.50 2.25 N/A
Q 28 24 N/A U-L-D .137 .118 N/A 3.50 3.00 N/A
R 35 31 N/A U-L-D .172 .152 N/A 4.38 3.88 N/A
S 40 35 N/A U-L-D .196 .172 N/A 5.00 4.38 N/A
T 48 42 N/A U-L-D .235 .206 N/A 6.00 5.25 N/A
U 59 53 N/A U-L-D .289 .260 N/A 7.38 6.63 N/A
V 80 71 N/A U-L-D .392 .348 N/A 10.00 8.88 N/A
0 Default: 15 x 12 U-L-D Scalable
*U = Uppercase, L = Lowercase, D = Descenders