Filter
Top Products
Load Media and Ribbon
12
P1060608-003 ZT400™ Series Quick Reference Guide 4/8/14
9. Which type of media did you load into the printer?
10. Push down the printhead assembly (1), and then rotate the printhead-open lever (2) until it
locks into place.
11. If necessary, press PAUSE to exit pause mode and enable printing.
Load Ribbon
12. Position the ribbon with the loose end unrolling as shown.
If you loaded... Then...
Direct Thermal media
Continue with step 10.
Thermal Transfer media
Continue with step 12.
Important • Use ribbon that is wider than the media to protect the printhead from wear.
Ribbon must be coated on the outside (refer to the User Guide for more information).
1
2