Filter
Top Products
1918
6.4 Adjusting the height and
angle of the projector
You can adjust the height and angle of the
projector by adjusting the four small feet
underneath the product.
Note!
The projector should never be left with an
angle of more than 15 degrees over a long
period of time. Doing so will shorten the
lifetime of the lamp.
6.5 Aspect Ratio Selection
(TheaterLite DSV-110
only)
Aspect Ratio selection.
In this menu you can select the aspect
ratio of 4:3 or 16:9.
7.1 The menu system
Main menu.
Menu with video input.
Menu with TV tuner option installed.
7.1.1 Main menu
The main menu is divided into two parts:
• Icons
• Help text
Icons
The icons illustrate a function and are grouped
into groups with similar functionality. Clicking
an icon activates it. Some icons have a direct
function and some will activate a second level
menu.
Help text
By moving the cursor over the icons the text
area will give a short description of the icon.
Stand-by
The stand-by key will set the projector in
stand-by mode. The lamp will turn off, and the
fans will run for a little while cooling the pro-
jector before stopping. To return to normal
mode, press the Menu key on the remote
control.
7. Using the menus
6.3 Using the touch panel on
the projector
The touch panel gives you direct access
to the most important functions of the
projector. The key functions are as follows:
Source
The projector has direct keys for four sources:
Functionality
• Computer (PC)
• TV
• Composite video
• S-video
The TV source button will only work when
an optional TV-tuner is installed.
Volume (+/-)
The Volume key is used to control the sound
level when the projector is connected to an
audio source.
Channel (+/-)
Click on the +/- to switch between pre-pro-
grammed TV channels when TV is selected as
source.
Focus
Press the Focus key to focus the projected
image after zooming to the correct size.
Zoom
Press the Zoom key to zoom the projected
image to the desired size.
Stand by
The stand by key will set the projector in
stand by mode. The lamp will turn off, and the
fans will run for a short period cooling the
projector before stopping. To return to normal
mode, press the Stand by key once more, or
press the Menu key on the remote control.
Automatic set-up
The automatic set-up key will set up the pro-
jector with optimal settings for the connected
source. If you want to do manual adjustments
you can do this by using the menus (see sec-
tion 7).
Note!
You can not access the screen menu sys-
tem without the remote control.
p c
t v
video
s-video
setup
volume
channel
focus
power
lamp
zoom
source
Figure 10: The keys on the touch panel on
the projector