Filter
Top Products
Server Cards IMACS System Release 5.1.6 4-21
ACS-PRI/BRI Card Configuring ISDN Features
You must assign an interface ID to any WAN link that will contain B channels before you will
be able to assign the specific B channels to that facility. If you assign a B channel to a WAN
that is not assigned an Interface ID, the system message, "Intf.ID must be uniquely identified,"
will appear when you try to activate the D channel. In the example shown in Figure 4-9, for D
channel #1, the user plans to assign B channels on WAN 1-1, 1-2 and 2-1.
Figure 4-9.Interface Identification Screen
To change an interface ID, place the cursor over the desired Intf. ID, and press the “Enter”
Key. Input the correct value in the space provided using the up and down arrow keys and press
the “Enter” key again. Save your work, and press “m” to return to the main D channel
configuration screen.