Zoom 4412A Computer Hardware User Manual


 
Chapter 2: Setting Security
19
6
66
6
In the
Preconfigured key [WEP]
area
,
do the following:
a
In the
Format for entering key
drop-down list, select
ASCII characters
if your network uses all Zoom
wireless products
Hexadecimal digits
if an access point, router, or
some adapters are not Zoom products
b
In the
Key Length
drop-down list, select
128 bits
or
64
bits
.
Note: 128-bit WEP provides more security than 64-bit,
but 128-bit could diminish network performance.
c
In the
Key Index
drop-down list, if you are using a 64-bit
key, select which of four keys – 1, 2, 3, or 4 – will be
used to encrypt the data. The key you select must be the
same one that is selected on the access point. We
recommend that you use Key 1.
128-bit WEP uses just a single key.
d
In the
Network Key
text box, enter a key using the table
below as a guide.
The key must be the same for all the devices on your
network.
If you selected key
type…
Enter exactly…
Hexadecimal digits
– 128 bits
26 characters A–F, a–f and 0–9. For
example,
00112233445566778899AABBCC.
Hexadecimal digits
– 64 bits
10 characters. The characters can
be A-F, a-f, and 0-9. For example,
11AA22BB33.
ASCII – 128-bits 13 characters. The characters can
be any upper- or lower-case letters
and numbers. For example:
MyKey12345678.
ASCII – 64 bits 5 characters. The characters can be
any upper- or lower-case letters and
numbers. For example, MyKey.
7
77
7
Re-enter the key in the
Confirm Network Key
text box.