Filter
Top Products
Appendix D: Troubleshooting 59
Problem
I cannot log into the Zoom Configuration Manager. I have
typed http://10.0.0.2 or http://10.0.0.3 (depending on whether I
am using the X4’s Ethernet jack or USB port), but I am not
prompted for a User Name and Password.
Solution
There are several issues that could cause this problem. Check these
items:
•
If you are using a Macintosh or Linux computer, your TCP/IP
settings may not be properly configured. See page 50 for more
information.
•
If you are using Mac OS X 10.3 and above, renew your IP
address: Point to System Preferences, then choose Network.
Click the Configure button and then the Renew DHCP
Lease button.
•
If you are using a Windows computer, perform a
Release/Renew operation:
!
Windows 2000/XP: From the desktop, click the Start
button, then point to Programs, point to Accessories,
and then select Command Prompt. Type ipconfig /all
and press the Enter key on your keyboard. In the
subsequent dialog box, make sure the NIC adapter is
highlighted in the drop-down list, click Renew and then
click Release. Then type 10.0.0.2 or 10.0.0.3 (as
appropriate) into your browser’s address bar, and the
Network Password box should display.
!
For Windows 95/98/Me: From the desktop, click the
Start button and the point to Run. Type winipcfg, and
click OK. In the subsequent dialog box, make sure the
NIC adapter is highlighted in the drop-down list, click
Renew and then click Release. Then type 10.0.02 or
10.0.0.3 (as appropriate) into your browser’s address bar,
and the Network Password box should display.