Filter
Top Products
Chapter 6 Wireless LAN
NWA1000 Series User’s Guide
72
6.6 Wireless Security Screen
Use this screen to choose the security mode for your NWA.
QoS Select the Quality of Service priority for this BSS’s traffic.
• If you select WMM from the QoS list, the priority of a data packet depends on the
packet’s IEEE 802.1q or DSCP header. If a packet has no WMM value assigned to
it, it is assigned the default priority.
•If you select WMM_VOICE, WMM_VIDEO, WMM_BESTEFFORT or
WMM_BACKGROUND, the NWA applies that QoS setting to all of that SSID’s
traffic.
•If you select None, the NWA applies no priority to traffic on this SSID.
Note: When you configure an SSID profile’s QoS settings, the NWA applies the same
QoS setting to all of the profile’s traffic.
BSSID VLAN ID Enter a VLAN ID for the SSID profile.
Packets coming from the WLAN using this SSID profile are tagged with the VLAN ID
number by the NWA.
Number of Wireless
Stations Allowed to
Associate
Use this field to set a maximum number of wireless stations that may connect to the
device.
Hidden SSID If you do not select the checkbox, the NWA broadcasts this SSID (a wireless client
scanning for an AP will find this SSID). Alternatively, if you select the checkbox, the
NWA hides this SSID (a wireless client scanning for an AP will not find this SSID).
Intra-BSS Traffic
Blocking
Select this to prevent wireless clients in this profile’s BSS from communicating with
one another.
Enable Layer-2
Isolation
Select this to enable layer-2 isolation for this profile. Wireless clients that connect to
the WLAN using this SSID can access only certain pre-defined devices. See Section
6.8 on page 80.
Intra-BSS traffic blocking is enabled automatically when you enable layer-2 isolation.
Back Click Back to return to the previous screen.
Apply Click Apply to save your changes.
Cancel Click Cancel to begin configuring this screen afresh.
Table 16 SSID: Edit (continued)
LABEL DESCRIPTION