Filter
Top Products
Prestige 2602H-6xC Support Notes
All contents copyright (c) 2005 ZyXEL Communications Corporation.
22
You apply NAT via menus 4 and 11.3 as displayed next. The next figure how you apply NAT for Internet
access in menu 4. Enter 4 from the Main Menu to go to Menu 4-Internet Access Setup.
Menu 4 - Internet Access Setup
ISP's Name= MyISP
Encapsulation= PPPoE
Multiplexing= LLC-based
VPI #= 0
VCI #= 33
ATM QoS Type= UBR
Peak Cell Rate (PCR)= 0
Sustain Cell Rate (SCR)= 0
Maximum Burst Size (MBS)= 0
My Login= cso@zyxel
My Password= ********
Idle Timeout (sec)= 0
IP Address Assignment= Dynamic
IP Address= N/A
Network Address Translation= Full Feature
Address Mapping Set= 1
Press ENTER to Confirm or ESC to Cancel:
The following table describes the options for Network Address Translation.
Field Options Description
Full Feature
When you select this option the SMT will use Address
Mapping Set 1 (Menu 15.1-see later for further
discussion).
None
NAT is disabled when you select this option.
Network Address Translation
SUA Only
When you select this option the SMT will use Address
Mapping Set 255 (Menu 15.1-see later for further
discussion). This option use basically Many-to-One