Filter
Top Products
Prestige 2602H-6xC Support Notes
All contents copyright (c) 2005 ZyXEL Communications Corporation.
27
Local IP:
Start= 0.0.0.0
End = N/A
Global IP:
Start= 0.0.0.0
End = N/A
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this screen.
Field Description Option/Example
Type
Press [SPACEBAR] to toggle through a total of 5 types. These
are the mapping types discussed above plus a server type. Some
examples follow to clarify these a little more.
One-to-One
Many-to-One
Many-to-Many Overload
Many-to-Many No
Overload
Server
Start This is the starting local IP address (ILA) 0.0.0.0
Local
IP
End
This is the ending local IP address (ILA). If the rule is for all
local IPs, then put the Start IP as 0.0.0.0 and the End IP as
255.255.255.255. This field is N/A for One-to-One type.
255.255.255.255
Start
This is the starting global IP address (IGA). If you have a
dynamic IP, enter 0.0.0.0 as the Global Start IP.
0.0.0.0
Global
IP
End
This is the ending global IP address (IGA). This field is N/A for
One-to-One, Many-to-One and Server types.
200.1.1.64
Note: For all Local and Global IPs, the End IP address must begin after the IP Start address, i.e., you cannot
have an End IP address beginning before the Start IP address.
• NAT Server Sets