Filter
Top Products
ES-2108 Series User’s Guide
104 Chapter 16 Port Authentication
Figure 49 Port Authentication
16.2.1 Activate IEEE 802.1x Security
From the Port Authentication screen, display the configuration screen as shown.
Figure 50 Port Authentication: 802.1x
The following table describes the labels in this screen.
Table 31 Port Authentication: 802.1x
LABEL DESCRIPTION
Active Select this check box to permit 802.1x authentication on the switch.
Note: You must first enable 802.1x authentication on the switch
before configuring it on each port.
Port This field displays a port number.
Active Select this checkbox to permit 802.1x authentication on this port. You must first
allow 802.1x authentication on the switch before configuring it on each port.
Reauthentication Specify if a subscriber has to periodically re-enter his or her username and
password to stay connected to the port.
Reauthentication
Timer
Specify how often a client has to re-enter his or her username and password to stay
connected to the port.
Apply Click Apply to save your changes back to the switch.
Cancel Click Cancel to begin configuring this screen afresh.