Filter
Top Products
ES-2108 Series User’s Guide
Chapter 27 Introducing the Commands 159
27.9.3 General Configuration Mode
The following table lists the commands in Configuration (or Config) mode.
session
Displays current SSH session(s).
system-information
Displays general system information.
t i m e
Displays current system time and date.
timesync
Displays time server information.
trunk
Displays link aggregation information.
vl an
Displays the status of all VLANs.
<vlan-id>
Displays the status of the specified VLAN.
vlan-stacking
Displays VLAN stacking settings.
vlan1q gvrp
Displays GVRP settings.
port-isolation
Displays port isolation settings.
ssh <1|2> <[user@]dest-
ip>
Connects to an SSH server with the
specified SSH version.
[command </>]
Connects to an SSH server with the
specified SSH version and addition
commands to be executed on the server.
traceroute <ip|host-name> [in-
band|out-of-
band|vlan <vlan-
id>][ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a
device.
help
Displays command help information.
write memory
Saves current configuration to the
configuration file the switch is currently
using.
<index>
Saves current configuration to the
specified configuration file on the switch.
Table 57 Command Summary: Enable Mode (continued)
COMMAND DESCRIPTION
Table 58 Command Summary: Configuration Mode
COMMAND DESCRIPTION
admin-password <pw-string>
<confirm-string>
Changes the administrator
password.
bandwidth-
control
Enables bandwidth control.
diffserv
Enables DiffServ.
dscp <0-63>
priority <0-7>
Sets the DSCP-to-IEEE 802.1q
mappings.