Filter
Top Products
Dimension ES-3024 Ethernet Switch
Commands Introduction 21-7
Table 21-1 command summary
COMMAND DESCRIPTION
ping <hostid>
Pings a remote host.
route
status [if]
Displays the routing table.
add
<dest_addr|default>[/<bits>]
<gateway> [<metric>]
Adds a route.
addiface <dest_addr|default>
[/<bits>] <gateway> [<metric>]
Adds an entry to the routing table
for the specified interface.
addprivate <dest_addr|default>
[/<bits>] <gateway> [<metric>]
Adds a private route.
drop <host addr> [/<bits>]
Drops a route.
status
Displays IP statistic counters.
udp status
Displays the UDP status.
tcp
ceiling [value]
Sets the TCP maximum round trip
time.
floor [value]
Sets the TCP minimum round trip
time.
irtt [value]
Sets the TCP default initial round
trip time.
kick <tcb>
Drops the TCP connection of the
specified TCP Control Block.
limit [value]
Sets a TCP output window limit.
mss [value]
Inputs the TCP Maximum
Segment Size.
reset <tcb>
Resets the TCP connection of the
specified TCP Control Block.
rtt <tcb> <value>
Sets the round trip time for the
TCP control block.
status [tcb] [<interval>]
Displays the TCP statistic
counters.
syndata [on|off]
Turns on/off the option to send
data with the SYN packet.
trace [on|off]
Turns on/off the trace for
debugging.
telnet <host> [port]
Telnets to the specified host.
support
Shows if TFTP is supported.
stats
Displays the TFTP status.