Filter
Top Products
ZyAIR G-220 User’s Guide
3-6 Wireless Station Mode Configuration
security settings as the associated wireless device. Refer to Section 3.3.2 for more information.
Otherwise click the close (
) button and connect to another wireless network without WEP
encryption.
Step 4. Verify that you have successfully connected to the selected network and check the network
information in the Link Info screen.
3.3.2 Security Settings
When you configure the ZyAIR to connect to a network with WEP encryption activated and the security
settings are disabled on the ZyAIR, the screen displays as follows.
Figure 3-4 Station Mode: Site Survey: Security Settings
The following table describes the labels in this screen.
Table 3-4 Station Mode: Site Survey: Security Settings
LABEL DESCRIPTION
Security Settings
WEP
Select 64 Bits, 128 Bits or 256 Bits to activate WEP encryption and then fill in the
related fields.
Select Disable to deactivate WEP encryption.
Authentication
Select an authentication method. Choices are Auto, Shared Key and Open System.
Refer to Section 2.5 for more information.