Filter
Top Products
ZyAIR G-220 User’s Guide
Access Point Mode Configuration 4-5
Table 4-2 Access Point Mode: Configuration
LABEL DESCRIPTION
OutputPower Set this field if you need to conserve power consumption (especially for notebook
computers). This control changes the strength of the ZyAIR’s antenna gain or
transmission power. Antenna gain, measured in dBm (decibel relative units compared to
milliwatts), is the increase in coverage. Higher antenna gain improves the range of the
signal for better communications.
Select High to set the ZyAIR’s antenna to transmit at 17-dBm.
Select Medium-High to set the ZyAIR’s antenna to transmit at 15-dBm.
Select Medium-Low to set the ZyAIR’s antenna to transmit at 13-dBm.
Select Low to set the ZyAIR’s antenna to transmit at 11-dBm. This allows for the least
power consumption.
Security Settings
WEP
Select 64 Bits, 128 Bits or 256 Bits to activate WEP encryption and then fill in the
related fields.
Select Disable to deactivate the WEP encryption.
Authentication
Type
Select an authentication method. Choices are Auto, Shared Key and Open System.
Refer to Section 2.5 for more information.
Pass Phrase When you select the radio button, enter the passphrase. As you enter the passphrase,
the ZyAIR automatically generates four different WEP key and displays it in the key field
below.
Refer to Section 2.2.1 for more information.
Transmit Key Select a default WEP key to use for data encryption. The key displays in the field below.