Filter
Top Products
Chapter 3 Connection Status and System Info
LTE6100 User’s Guide
28
Mode This is the method of encapsulation used by your ISP.
IP Address This field displays the current IP address of the LTE Device in the WAN.
LAN Information
IP Address This field displays the current IP address of the LTE Device in the LAN.
IP Subnet Mask This field displays the current subnet mask in the LAN.
DHCP Server This field displays what DHCP services the LTE Device is providing to the LAN.
Choices are:
Server - The LTE Device is a DHCP server in the LAN. It assigns IP addresses to
other computers in the LAN.
None - The LTE Device is not providing any DHCP services to the LAN.
LTE Status
Status This displays 4G LTE if there is an LTE connection, otherwise, it displays N/A.
Signal Strength This displays the strength of the LTE connection that the LTE Device has with the
base station which is also known as eNodeB or eNB.
Service Provider This displays the service provider’s name of the connected LTE network.
Frequency Band This displays LTE if there is an LTE connection.
Connection Uptime This displays how long the LTE connection has been available since it was last
established successfully.
ODU F/W Version This displays the firmware version of the outdoor unit.
Module F/W Version This displays the firmware version of LTE module.
IMEI This displays the LTE Device’s International Mobile Equipment Identity number
(IMEI). An IMEI is a unique ID used to identify a mobile device.
IMSI This displays the International Mobile Subscriber Identity (IMSI) of the SIM card
inserted in the outdoor unit. An IMSI is a unique ID used to identify a mobile
subscriber in a mobile network.
Interface Status
Interface This column displays each interface the LTE Device has.
Status This field indicates whether or not the LTE Device is using the interface.
For the LTE WAN interface, this field displays Up when the LTE Device is connected
to an LTE network and Down when the LTE Device does not have an LTE
connection.
For the LAN interface, this field displays Up when the LTE Device is using the
interface and Down when the LTE Device is not using the interface.
Rate For the LTE WAN interface, this displays 4G LTE if there is an LTE connection.
For the LAN interface, this displays the port speed and duplex setting.
System Status
System Up Time This field displays how long the LTE Device has been running since it last started
up. The LTE Device starts up when you plug it in, when you restart it
(Maintenance > Reboot), or when you reset it (see Section 1.6 on page 15).
Current Date/Time This field displays the current date and time in the LTE Device. You can change this
in Maintenance > Time Setting.
System Resource
Table 3 System Info Screen (continued)
LABEL DESCRIPTION