Filter
Top Products
ZyXEL M-202 User’s Guide
Chapter 3 ZyXEL Utility Configuration 47
3 If you select Infrastructure network type in the first screen, select WEP, WPA, WPA2,
WPA-PSK, WPA2-PSK or 802.1x from the drop-down list box to enable data
encryption. If you select Ad-Hoc network type in the first screen, you can only use WEP
encryption method. Otherwise, select DISABLE to allow the ZyXEL M-202 to
communicate with the access points or other peer wireless computers without any data
encryption and skip to step 5.
Figure 24 Profile: Security Setting: Encryption Type
4 The screen varies depending on the encryption method you select in the previous screen.
The settings must be exactly the same on the APs or other peer wireless computers as
they are on the ZyXEL M-202. Refer to Section 3.2.2 on page 38 for detailed information
on wireless security configuration.
Figure 25 Profile: Security Setting
5 This read-only screen shows a summary of the new profile settings. Verify that the
settings are correct. Click Save to save and go to the next screen. Click Back to return to
the previous screen. Otherwise, click Exit to go back to the Profile screen without saving.