ZyXEL Communications P-660H-Tx v2 Switch User Manual


  Open as PDF
of 11
 
P-660H-Tx v2 Quick Start Guide
3
1 Hardware Connections
1DSL: Use the gray telephone wire to connect your P-660H-Tx v2’s DSL port to a telephone jack (or to a
splitter, if one is already installed).
2ETHERNET: Use the yellow Ethernet cable to connect a computer to an ETHERNET port for initial
configuration and/or Internet access.
3POWER: Use the power adaptor provided with your P-660H-Tx v2 to connect an appropriate power source
to the POWER socket. Make sure the power source is on.
4 Push in the POWER button.
5 Look at the lights on the front panel.
 previous next