Filter
Top Products
P-660R-D Series Quick Start Guide
4
Note: Configuration genie or Zero configuration are only able to
configure the device automatically for Internet access if you are
using PPPoE, PPPoA or ENET ENCAP encapsulation with a
dynamically-assigned IP address from your ISP.
If you’re not using these Internet access settings, then use the
Web Configurator Internet Access Wizard to manually
configure the device.
You will need your Internet access information such as user name and
password if given by your ISP.
INFORMATION From ISP Encapsulation Method you are using
None RFC1483 in bridge mode with a dynamic IP address
or ENET ENCAP with a dynamic IP address
An IP address only RFC1483 in routing mode with a static IP address
A user name and password (and
an IP address)
PPPoA or PPPoE encapsulation (with a static IP
address)
An IP address, subnet mask and
a gateway IP address
ENET ENCAP with a static IP address