Filter
Top Products
PL-100 User’s Guide
Chapter 4 Using the Configuration Utility 31
Figure 11 Add Device
A confirmation box will appear if the password was entered correctly and if the device was
found. If a device is not found, you will be notified and suggestions to resolve common
problems will be presented.
Note: The device must be present on the power line (plugged in) in order for the
password to be confirmed and added to the network. If the device could not be
located, a warning message will be shown.
A typical screen after naming and supplying passwords might appear as below, which is also
the diagnostics screen.
Figure 12 Naming and Passwords