Filter
Top Products
SP-200E User’s Start Guide
4
2.3 Front Panel Push-Buttons
Push the power switch to ON. The buttons on the front panel light up when the statement printer is receiving
power. The following table describes push-button’s LED status and functions.
Note: If the printer prints continuously for two minutes, you must stop printing for at least eight minutes.
Table 2 Front Panel Push-Buttons
3 Loading Paper Rolls
Use the following steps to prepare the statement printer for use with a gateway.
LED Status Printer mode Function
All Button
LEDs Off
Off All of the printer’s functions are stopped.
Hold button A down while you turn on the power to have the printer print a self-
test.
All Button
LEDs On
(Green)
On (Ready) Push a button to create a customer account with the configured account service
period. Refer to the gateway User’s Guide for information on how to configure the
gateway for use with the SP-200E.
Button A
Blinking
(Green)
Out of paper/
Cover open
No function.
1 Push the cover release button. 2 Open the cover.