Filter
Top Products
Chapter 28 OSPF
XGS-4728F User’s Guide
239
In the OSPF Configuration screen, click Interface to display the OSPF Interface screen.
Figure 125 IP Application > OSPF Configuration > OSPF Interface
The following table describes the labels in this screen.
Table 92 IP Application > OSPF Configuration > OSPF Interface
LABEL DESCRIPTION
Network Select an IP interface.
Area ID Select the area ID (in an IP address format with dotted decimal notation) of an area to
associate the interface to that area.
Authentication
Note: OSPF Interface(s) must use the same authentication method
within the same area.
Select an authentication method. The choices are Same-as-Area, None (default),
Simple and MD5.
To participate in an OSPF network, you must make the authentication method and/
or password settings the same as the associated area.
Select Same-as-Area to use the same authentication method within the area and
set the related fields when necessary.
Select None to disable authentication. This is the default setting.
Select Simple and set the Key field to authenticate OSPF packets transmitted
through this interface using simple password authentication.
Select MD5 and set the Key ID and Key fields to authenticate OSPF packets
transmitted through this interface using MD5 authentication.
Key ID When you select MD5 in the Authentication field, specify the identification number of
the authentication you want to use.
Key When you select Simple in the Authentication field, enter a password eight-
character long. Characters after the eighth character will be ignored.
When you select MD5 in the Authentication field, enter a password 16-character
long.
Cost The interface cost is used for calculating the routing table. Enter a number between 0
and 65535. The default interface cost is 15.