
Quick Reference Guide to Administration Procedures
(continued)
Procedure
Touch
Then
CUSTOMIZE WITH OTHER SYSTEM OPTIONS
Assign outward and toll call
restrictions to voice
terminals.
NOTE:
If you do not need to
dial a toll prefix (O or 1) to
place a long distance call,
follow steps 1 and 2 below. If
you use a toll prefix, just
follow step 2 below.
1. Set lines to identify long
Call Rstr
●
Touch line buttons.
distance calls by area
Steady green on = toll prefix
code only. Green off
= area code only
●
Touch
Call Rstr.
2. Assign restrictions to voice
Adm Tel
●
Touch Auto Intercom button representing voice terminal.
terminals.
●
Touch
Call Rstr.
Steady green on
= all calls permitted
(See page 42.)
Flashing green
= local and intercom calls and any
assigned lists
Green off
= intercom calls and any assigned lists
●
Touch
Adm Tel.
Give a voice terminal the
Adm Tel
●
Touch Auto Intercom button representing new voice terminal.
same line and call restriction
●
Touch
Copy.
assignments as another
●
Touch Auto intercom button representing voice terminal whose
voice terminal.
assignments you want to copy.
Set up alloweci lists.
Adm Misc
● Dial #5.
●
Dial
list
number (0 through 7), then dial entry number (0
(See page 44.)
through 9).
●
Dial entry (area code and/or exchange).
●
Dial #900 to get a printout of an allowed list.
●
Touch
Adm Misc.
Assign allowed-list call
Adm Misc
●
Dial #4, then dial list number (O through 7).
restrictions to voice
●
Touch Auto intercom button representing voice terminal.
terminals.
Steady green on
= access to numbers in list
Green off
= no access to numbers in list
(See page 45.)
●
Touch
Adm Misc.
118