1
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE 7
Getting Started
This chapter provides an introduction to the Wireless Access Point (WAP) devices
web-based configuration utility, and includes these topics:
• Starting the Web-Based Configuration Utility
• Using the Access Point Setup Wizard
• Getting Started
• Window Navigation
Starting the Web-Based Configuration Utility
This section describes system requirements and how to navigate the web-based
configuration utility.
Supported Browsers
• Internet Explorer 7.0 or later
• Chrome 5.0 or later
• Firefox 3.0 or later
• Safari 3.0 or later
Browser Restrictions
• If you are using Internet Explorer 6, you cannot directly use an IPv6 address
to access the WAP device. You can, however, use the Domain Name System
(DNS) server to create a domain name that contains the IPv6 address, and
then use that domain name in the address bar in place of the IPv6 address.
• When using Internet Explorer 8, you can configure security settings from
Internet Explorer. Select Tools > Internet Options and then select the
Security tab. Select Local Intranet and select Sites. Select Advanced and
then select Add. Add the intranet address of the WAP device (http://<ip-
